83" High Side Dump (DH)

Available Lengths

  • 10’
  • 12’
  • 14’

Dare to Compare

Financing

Standard Features

  • 14,000 lb. G.V.W.R.
  • 7,000 lb. x 2 G.A.W.R.
  • 2 5/16” Ball Adjustable Bulldog Coupler
  • Safety Chains
  • 1 - Top Wind Drop Leg Jack (8,000 lb.)
  • 2 - Dexter E-Z Lube Brake Axles (7,000 lb.)
  • 6 Leaf Slipper Spring Suspension
  • 4 - 16” White Spoke Wheels
  • 4 - 235/80R16 Provider Radial Tires (3,520 lb.)
  • Defender II Electric Breakaway Kit w/ Charger
  • 3M DOT Reflective Tape
  • 1/8” Treadplate Steel Fenders
  • Lockable Toolbox (Houses Battery and Pump)
  • 2 - Way Gate (Barn Doors & Spreader Gate)
  • 6’ 6” Slide In Channel Ramps
  • 4 - D-Rings (Welded inside the Box)
  • 40° Dump Pitch
  • 12VDC KTI Hydraulic Pump
  • 5” x 17” West Craft Hyd. Cylinder w/Scissor Lift
  • 12’ Control Cable
  • Mounting Brackets for Roll-up Tarp
  • 6” Channel Main Frame & Tongue
  • 2” x 6” x 11ga. Tubing Bed Frame
  • 3” Channel Crossmembers 16” on Center
  • 10ga. HD Steel Bed
  • 83” Extra Wide Bed
  • 10ga. HD Steel Sides
  • 48” High Sides (36” Available)
  • Optronics Flushmount Lifetime LED Lights
  • Bargman Sealed Wire Harness w/ 7-Way RV Plug
  • Stake Pockets for Extensions
  • Sand Blasted, Acid Washed, Powder Coated
  • Interstate (TM) Deep Cycle Battery
  • Integrated 12V Trickle Charger
  • 110V Battery Charger
  • GN Option Equipped with 2 -10k Jacks
  • GN Option Equipped with Front Toolbox

Notes:
10’ 10.25 cu yds - 12’ 12.30 cu yds - 14’ 14.33 cu yds *** MAX GVWR 16,000 with 8k Axle Option and 16k+ Rated Coupler *** Bumperpull Tongue Length (4’ 2”)

Options

Default options, those included in the base model, are marked by a check .

Coupler Options

[A] BP 2 5/16” Adjustable (14,000 lb.)
[B] BP 2 5/16” Adjustable Rigid Mount (25,000 lb.)
[E] GN 2 5/16” Round (30,000 lb.) w/ 6” Longer Tube
[L] GN Load-Leveling 2 5/16” Square (30,000 lb.)
[P] 3” Pintle Eye - Channel-mount (20,000 lb.)
[R] GN 2 5/16” Round (25,000 lb.)
[S] GN 2 5/16” Square (25,000 lb.)
[T] HD 2 5/16” Adjustable Channel Mount 3 Bolt Coupler

Axle Options

[72BS] (2) 7,000# (Dexter) Electric
[72GS] (2) 7,000# (Dexter) Elec/Hyd Drum (1,000 PSI Pump)
[72SS] (2) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler]
[92BS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric
[92GS] (2) 7,000# w/235/85R16 LR-G Tires (Dexter) Elec/Hyd Drum (1,000 PSI Pump)

Tail Options

[S] Split / Spreader Gate

Color Options

[K] Black Powder Coat
[0] Primer + Black Powder Coat (Texas Only)
[1] Primer + Red Powder Coat (Texas Only)
[2] Primer + Tractor Green Powder Coat (Texas Only)
[3] Primer + White Powder Coat (Texas Only)
[4] Primer + Equipment Yellow Powder Coat (Texas Only)
[5] Primer + Tractor Orange Powder Coat (Texas only)
[6] Primer + Grey Powder Coat (Texas only)
[8] Primer + Desert Tan (Texas Only)
[G] Grey Powder Coat
[J] Tractor Green Powder Coat (Ohio Only)
[N] Tractor Orange Powder Coat (OHIO ONLY)
[P] Primer Only (Texas Only)
[R] Red Powder Coat
[T] Desert Tan
[W] White Powder Coat
[Y] Equipment Yellow Powder Coat
[Z] No Paint No Primer (Texas Only)

Other Options

[-DR02] 2 Pair D-Rings
[-JA06] 2 Hydraulic Jacks Includes Front Toolbox ²
[-RS01] Rear Support Stands
[-SW03] 3ft Tall Sides
[0] Cold Weather Wiring Harness (7-Way RV)
[8] Full Size Divided Toolbox Upgrade (BP Only)
[C] 12”oc Crossmembers
[D] 1 Extra Pair of D-Rings
[E] Power Up/Down & Gravity Down Upgrade
[H] HD 24” Side Extensions 10ga
[M] Mount Only for Spare Tire
[P] Tarp kit 18ft x 84 inches (Pull Bar)
[T] Spare Tire and Mount (Bumper Pull)
[U] Deck on the Neck (GN Only)
[V] 24” Side Extensions (Expanded Metal)
[X] 2-speed Jack (12,000 lb.)
[Y] 24” Side Extensions (Solid)
[Z] Grain Chute