Single Axle HD Tilt (T1)

Available Lengths

  • 13’
  • 16’

  • Air Ride Available

Dare to Compare

Financing

Standard Features

  • Hydraulic Cushion Cylinder w/ Reservoir
  • 5” Channel Tongue
  • 5" x 2" Steel Tube Frame
  • 3” Channel Crossmembers 16” on Center
  • 2” Treated Pine Lumber Deck
  • 81” x 13' Tilting Deck
  • 81” Between Fenders
  • DOT Approved Flushmount Lifetime LED Lights
  • Sealed Bargman Wire Harness w/ 7-Way RV Plug
  • Sand Blasted, Acid Washed, Powder Coated
  • Knife Edge Tail
  • 4 Recessed D-rings & 1 Center D-ring
  • Bull Nose Bumper
  • Mitered Front Corners

Notes:
Bumper-pull Tongue Length (5’)

Options

Default options, those included in the base model, are marked by a check .

Coupler Options

[D] BP 2” Adjustable
[J] BP 2 5/16” Adjustable
[P] 3” Pintle Eye - Channel-mount (14,000 lb.)

Axle Options

[51BD] (1) 5,200# (Dexter) Electric
[71BD] (1) 7,000# (Dexter) Electric
[71SD] (1) 7,000# (Dexter) Surge Hydraulic Drum [Surge Coupler]
[91BD] (1) 7,000# w/235/85R16 LR-G Tires (Dexter) Electric
[91SD] (1) 7,000# w/235/85R16 LR-G Tires (Dexter) Surge Hydraulic Drum [Surge Coupler]

Tail Options

[T] Tilt Deck

Color Options

[K] Black Powder Coat
[0] Primer + Black Powder Coat (Texas Only)
[1] Primer + Red Powder Coat (Texas Only)
[2] Primer + Tractor Green Powder Coat (Texas Only)
[3] Primer + White Powder Coat (Texas Only)
[4] Primer + Equipment Yellow Powder Coat (Texas Only)
[5] Primer + Tractor Orange Powder Coat (Texas only)
[6] Primer + Grey Powder Coat (Texas only)
[8] Primer + Desert Tan (Texas Only)
[G] Grey Powder Coat
[J] Tractor Green Powder Coat
[N] Tractor Orange Powder Coat
[R] Red Powder Coat
[T] Desert Tan
[W] White Powder Coat
[Y] Equipment Yellow Powder Coat
[Z] No Paint No Primer (Texas Only)

Other Options

[-BWFL] Blackwood Classic Full Deck
[-BWOT] Blackwood Classic Outer Deck
[-DR01] 1 Pair D-Rings
[-DR07] 7 Pair D-Rings
[-FE05] Weld on Fenders
[-TB02] Bumper Pull Double Deck Toolbox (Upgrade)
[-TB04] Full Size Divided Toolbox Upgrade (BP Only)
[-TRA1] 1/2 x 1/2 Square Traction Bars on Rear of Deck
[-WN08] Warn 8k Zeon Winch w/ Plate, Batt, & Frt Toolbox
[-WN95] SuperWinch TS9500 w/ Plate, Batt, & Frt Toolbox
[-WP03] Winch Plate w/ Welded Receiver Hitch
[0] Cold Weather Wiring Harness (7-Way RV)
[3] Upgrade to Single 10k Jack (Bumper Pull)
[4] Plate for Winch
[7] Douglas Fir Lumber
[B] Solar Battery Charger
[C] 12”oc Crossmembers
[E] Rough Oak Floor
[F] Weld-On Strap Ratchets (2)
[H] Power up Power down Tilt
[K] Power Up/Down & Gravity Down
[M] Mount Only for Spare Tire
[P] 11ga(1/8”)DP Steel Floor w/ 4 Flushmount D-Rings & 16”oc
[Q] Front Toolbox (Bumper Pull & Pintle)
[R] Expanded Metal Traction Plate on Tailboard
[T] Spare Tire and Mount (Bumper Pull)
[Y] 1x1 Angle Traction Bars on Rear of Deck
[Z] Roller on Front of Deck for Winch Cable